Instruction manual

Instruction Manual Page 13
EDIsecure
®
XID 8300 Ethernet Status Monitor
4 Changing Retransfer Conditions
4.1 [Retransfer] Tab Sheet
The “Retransfer” screen enables you to set the retransfer conditions on the card.
4.2 Operation
 Update button: Applies the selected value to the printer.
 Refresh button: Displays the printer settings on the screen.
 Card Type: The appropriate value varies according to the type of card used. You can change the card
type on the “Media Setting” screen. (Refer to Page 16 of this manual.)
4.3 Setting Procedures
The vertical axis shown in the setting area indicates the retransfer temperature, and the horizontal axis
represents the retransfer speed. Click on the corresponding square to change the value. The selected value is
indicated using “*”.