User`s manual

User’s Manual

3.4 Entering OSD Setup Menu

The OSD Main menu contains a list of items that are used to configure the

Full-featured MPEG 4 DVR. To enter the Main menu, press MENU and then

enter Administrator or User password. The Password Verification screen

displays as follows.

Password Verification

________

Press Channel Keys To Enter Password

(4-8 Digits)

Press ◄ Key To Delete

You can set up to 3 different administrator password and user password. The

default passwords are all the same, as shown in the following table. The same

passwords, both administrator passwords and user passwords, are used for

entering the remote viewing software DVRRemote.

Administrator Password

User Password

1234 4321

NOTE: It is strongly suggested to change the passwords to prevent

unauthorized access to the unit.

After entering the correct password, the Main menu is displayed.

Main Menu

1. System Setup

2. Monitor Setup

3. Camera Setup

4. Record Setup

5. Sequence Setup

6. Event Setup

7. Database Setup

8. Configuration

9. Video Export

10. Shutdown

Move the cursor up / down over the OSD items using the Direction keys and

press ENTER to enter the selected sub-menu.