User`s manual

User’s Manual

FREEZE

• Press FREEZE while viewing live image, the live video will be frozen. The

date / time information shown on the monitor will continue updating. Press

FREEZE again to return to live mode.

• Press FREEZE while playing the recorded video, the playback video will

be paused. Press LEFT / RIGHT to move the recorded video reverse /

forward by single step. Press FREEZE again to continue playing video.

SEQ (Sequence)

Press to start automatic sequencing of the video coming from the installed

cameras.

In both Playback and Live mode, user can press SEARCH to call the Search

menu for searching and playing back recorded video by date and time or

events.

Press the key to call the OSD setup menu.

ZOOM/ENTER

• In OSD menu or selection interface, press the key to make the selection or

save settings.

• In live full screen view mode, press to view a 2× zoom image; press it

again to return.

CHANNEL

• When in both Live and Playback modes, press the CHANNEL key to view

the corresponding video in full screen. The number of the CHANNEL keys

corresponds to the number of cameras supported by the unit.

• When in dome control mode, the key named “1” is used to access the

Set/Go preset menu; the key named “2” is used to hide or display the

dome setting parameters.