User guide

12: Storage and Maintenance
96 —
revision 38
Note: To view the temperature and speed fan via the Intel Active Monitor, click the
icon in the system tray, and click the [Cooling] button. To change the
temperature settings from Celsius to Fahrenheit, click the [Options] button.
Humidity
To prevent damage to the LDVR-3U's internal components avoid positioning the
LDVR-3U where people are likely to eat or drink, or where it is excessively
damp or dry.
The following are minimum and maximum humidity values for LDVR-3U
operating and storage conditions.
Operating conditions: 20% to 80% (non condensing)
Storage conditions: 5% to 90% (non condensing)
Electrical Discharge
Electrical discharge from build-up of static can damage magnetic media and
electronic components in the LDVR-SP.
To minimize the amount of electrical discharge avoid:
• Carpets, particularly synthetic materials (If static is likely to be a problem,
place anti-static mats around the working area.)
• Areas with low humidity (Low humidity increases static discharge.)
• Other objects near the LDVR, which can hold a large static charge
• Unnecessary plastic or paper products in the area
Safety Precautions
In the interest of employee safety, heed the following precautions:
• Wear an ESD wrist strap before touching the LDVR-SP or any of its parts.
• Never open the chassis cover while the power is on.
• Always work with a partner when in the presence of electricity.
• Keep work areas clean, electrostatic free, and similar to the one in which the
LDVR-SP normally operates.
• Establish adequate space to freely work around the LDVR, its components,
and test equipment.
• Keep working surfaces static-free and have electrostatic discharge (ESD)
approved packages on hand when removing or replacing units.