User guide

Digital Video Hardware User Guide
revision 38 — 91
Note: To determine the IP address, click on the Windows [Start] button and select
Programs > Accessories > Command Prompt. Type ipconfig and press
<Enter>.
2. If the connection is not made, verify that Remote Desktop Sharing is enabled
and activated on the digital video server.
3. If the connection is made, type in your user name and password. Remote
Desktop Sharing will be established.
4. A meeting window will be displayed. Click the [OK] button.
5. Stop services on the remote machine.
6. In the NetMeeting menu, select Tools > File Transfer, or click on the [File
Transfer] button.
7. A new window appears, allowing you to copy the firmware file to the remote
machine.
8. Locate the file on Disc 2, under LDVR-SP Server Setup\setup.exe.
9. Click the [Add] button to add the file to the list of files to send over to the
other machine.
10. Under the File menu, select Send All.
11. When done, a confirmation message appears. Click the [Open] button to
start the installation.
12. Once the file is transferred, follow the procedure for installing the LDVR-3U
firmware using the transferred file instead of the file on the CD (start from
step #3 of the following procedure).
Install the Firmware through a CD
1. Insert the CD into the LDVR-3U.
2. Stop the Lenel Digital Video Server as well as the Linkage Server,
Communications Server, and Archive Server.
3. Run the program, LDVR-SP Server Setup\setup.exe, located on Disc 2 of the
B.A.S.I.S. CD set.
4. The welcome screen displays. Click on the [Next] button.