User guide

11: LDVR-3U Installation Procedures
86 —
revision 38
is the whole disk minus 4 GB) and click on the [Next] button.
e. Assign a drive letter of D.
f. Click on [Next].
g. Change the volume label to STORAGE 1.
h. Check the box to Perform Quick Format.
i. Click on the [Next] button.
13. Click on the [Finish] button. These properties will be updated. For the
selected disk, the status should read “Formatting.” When it has stopped
formatting, it should read “Healthy.”
14. For each currently unallocated portion of Disks 1 to 8:
a. Right-click on that portion and then select Create Volume… from the
popup menu that appears. The Create Volume Wizard should appear.
b. Click on the [Next] button.
c. Leave the volume type set to the default (Simple) and click on the
[Next] button.
d. Leave the Amount of Disk Space to Use field set to the default (which
is the whole disk) and click on the [Next] button.
e. Assign the volume drive letter according to the following sequence:
drive D for disk 1, drive E for disk 2, etc...
f. Click on the [Next] button.
g. Change the volume label to STORAGE n where n is the logical disk
number plus one. For example, use “STORAGE 2” for Disk 1,
“STORAGE 3” for Disk 2, etc…
h. Check the box to Perform Quick Format.
i. Click on the [Next] button.
j. Click on the [Finish] button. These properties will be updated. For the
selected disk, the status should read “Formatting.” When it has stopped
formatting, it should read “Healthy.”
15. The Computer Management window should list volumes C:, STORAGE 1,
STORAGE 2, … STORAGE 10, and CD-ROM (Z:).
LDVR-3U Firmware Installation
You can install LDVR-3U firmware locally or remotely. To install firmware
locally, you need the B.A.S.I.S. CD disk 2. To install firmware remotely you also
need NetMeeting, which is installed but not configured on your LDVR-3U.
NetMeeting enables you to quickly install firmware on multiple LDVR-3U units
and/or install firmware over a network. The following procedures describe how
to configure NetMeeting and use it to install LDVR-3U Firmware. Installing
firmware via the B.A.S.I.S. CD disk 2 is also covered.