User guide

11: LDVR-3U Installation Procedures
78 —
revision 38
Note: The Multi Volume Configuration application is also used to specify new
hard drives.
1. Click the Windows [Start] button, then select Programs > LDVR > Drive
Configuration Utility.
2. Highlight the appropriate volume in the LDVR-SP Storages list box.
3. Click the [Remove] button.
4. Repeat steps 2 and 3 for each new drive you want to remove.
5. Click the [OK] button.
6. Click the [Yes] button when the following screen displays:
7. Click the [OK] button.
8. Manually reboot your computer.
Uninstall the LDVR-3U Firmware
1. Close all the video player windows currently playing video from the
recorder, if there are any.
2. Run the program, \LDVR-SP Server Setup\setup.exe, located on Disc 2 of
the B.A.S.I.S. CD set.
Important: If you are running firmware version 1.5, you need administrative privileges
to log on and uninstall the firmware.
3. The welcome screen displays. Click the [Remove] button.
4. The LDVR-3U firmware is uninstalled. Click the [Finish] button.
5. Click the [Yes] button to restart the recorder.
Note: You can also uninstall the firmware by using the Windows Add/Remove
Programs option.