User guide

6: LDVR-SP Installation
52 —
revision 38
Note: Do not run the LDVR-SP with a wet air filter!
Add Hard Drive Volume(s) to Video Storage
The Multi Volume Configuration application is used to specify new hard drives.
This application is not required when you upgrade existing hard drives or replace
bad hard drives.
The Multi Volume Application is also used to temporarily remove hard drives
that are being worked on (upgraded or replaced). This procedure is necessary so
that the LDVR firmware does not try to record video on the hard drives when the
recorder is started.
1. Click the Windows [Start] button, then select Programs > LDVR > Drive
Configuration Utility. The following screen displays:
2. Highlight the appropriate drive in the Volumes list box.
3. Click the [Add] button.
4. Repeat steps 2 and 3 for each new drive you want to specify.
5. Click the [OK] button twice.
6. Manually reboot your computer.