User guide

Digital Video Hardware User Guide
revision 38 — 51
Note: The Multi Volume Application is also used to temporarily remove hard
drives that are being worked on (upgraded or replaced). This procedure is
necessary so that the LDVR-SP firmware does not try to record video on the
hard drives when the recorder is started.
1. Click the Windows [Start] button, then select Programs>LDVR>Drive
Configuration Utility. The following screen displays:
2. Highlight the appropriate drive in the Volumes list box.
3. Click the [Add] button.
4. Repeat steps 2 and 3 for each new drive you want to specify.
5. Click the [OK] button twice.
6. Manually reboot your computer.
Clean the Air Filter
Located on the inside front panel, the air filter removes dust and dirt as air is
drawn into the chassis. If the air filter becomes clogged with dirt, dust will be
directed into the storage devices and possibly damage them. It is important to
clean the air filters once a month (or more frequently depending on the
environmental conditions).
To clean the air filter:
1. Open the front door of the chassis.
2. Carefully brush off/remove any dust particles on the filter.
3. Wipe the air filter grates with a damp cloth.
4. If further cleaning is necessary, you can remove the grate by sliding it away
from the chassis and lifting up.
5. After the filter is clean, install the grate if necessary and close the front door
of the LDVR-SP chassis.