User guide

6: LDVR-SP Installation
44 —
revision 38
Note: Be sure to right-click in the disk icon.
Otherwise, Write Signature will not be an option in the pop-up menu.
b. Select the new drive(s). Click the [OK] button.
5. If any disk is labeled “Basic”:
a. Right-click on the disk icon and select the Upgrade to Dynamic Disk
option.
b. Choose all the disks to be upgraded by checking the boxes and click on
the [OK] button.
6. If you are upgrading the operating system logical disk drive (Disk 0):
a. Click on the [Upgrade] button. A confirmation message appears.
b. Click on the [Yes] button twice.
c. Click on the [OK] button in the dialog box that follows. The machine
reboots.
d. Once the machine boots up, log in.
e. Right-click on My Computer, select Manage from the pop-up menu,
and double-click on Disk Management.
7. If there is a D: partition, right-click on it and select Delete Volume.
8. Right-click on the new drive(s) and choose the Create volume on
unallocated space option.
9. The Create Volume Wizard appears. Click on the [Next] button.
10. Select the radio button for Spanned Volumes and click on the [Next] button.
11. In the list appearing in the window that follows, choose the new hard
drive(s) and click on the [Add] button. Click on the [Next] button.
12. In the next screen, assign the volume drive letter D:. If D: is not available,
select the next available drive. Click on the [Next] button.
13. Change the volume label to LDV-STORAGE.
14. Check the box to Perform Quick Format. Click on the [Next] button.
15. Click on the [Finish] button.
16. In the Computer Management window, the following volumes should be
listed:
C:
LDV-STORAGE (D:)
CD-ROM (E:)