User guide

Digital Video Hardware User Guide
revision 38 — 43
Configure Windows 2000 to Use Video Storage Drives
1. Once the system is booted up, right-click on My Computer and select
Manage from the pop-up menu.
2. Click Disk Management. You should see Disk 0, Disk 1 (and if you
installed a third drive, Disk 2), and CD-ROM listed. If you do not see these,
shut down and recheck your jumper settings and cable connections.
3. If the Write Signature and Upgrade Disk Wizard appears, click on the
[Cancel] button.
4. If the new disk(s) is labeled “Unknown”:
a. Right-click on it and select Write Signature from the pop-up menu.