User guide

Digital Video Hardware User Guide
revision 38 — 37
• The account name and password must exactly match the corresponding
account created on the LDVR-SP or within the digital video domain.
LDVR-SP Default Settings
The LDVR-SP is shipped with the following configuration. Please check with
your System Administrator for the necessary information to make these changes
in order to customize your system.
* B.A.S.I.S. refers to the LDVRs by their IP address. The same default IP address
is assigned to every LDVR-SP and should be changed according to the needs of
your network.
Notes: Any client connected to the LDVR-SP MUST use a true color or high color
VGA display mode (sometimes referred to as 65536 colors, 32768 colors, or
16 bits per pixel) in order to view video.
The signal must be maintained at a 1volt peak-to-peak rating. The vertical
sync should be 0.3 (required).
Installation Pre-requisites
The LDVR-SP can be installed in several different configurations depending on
your needs and type of package that you purchased. The requirements for system
hardware and software as well as the installation procedure itself differ
substantially depending on the desired configuration. The possible digital video
system configurations are as follows:
LDVR-SP (Lenel Digital Video Recorder) - a network-enabled digital video
station designed to provide live surveillance video data to other stations for
remote real time viewing and/or storage over LAN and WAN.
Screen resolution MUST be set to 800 X 600, 256 color*
User ID admin (member of the groups Users and Administrators)
Password admin
Computer Name VIDEO-SERVERn (n represents a unique number to identify the server or
workstation)
Workgroup SECURITY
IP Address 192.168.1.150*
Virtual Memory 256 MB (with base RAM of 130 MB)
Maximum Log Size 3072 KB