User guide

Digital Video Hardware User Guide
revision 38 — 33
Selecting the Audio Source
This is where you specify in the operating system what audio source you want to
use to capture sound. This is your Audio Input.
1. From the Control Panel, double click “Sounds and Multimedia.” Click the
Audio tab.
2. Click [Volume] in the “Sound Recording” section.
3. The Recording Control dialog box opens.
4. Select your audio source. If using a microphone, select the box under the
microphone volume slider or “Mic Volume.”
Enable Audio
If you plan on recording audio, the recorder must have the core recording
software activated. Executing this program activates the digital video recorders
capability to recorder audio.
Note: Do not run this program if the video recorder is not going to record audio.
1. The program is located on B.A.S.I.S. Disk 2. Navigate to \Lenel Digital
Video Recorder (LDVR 5.24)\program files\Lenel Systems\LDVR.
2. Run AudioEngager.exe.
3. Select the radio button to enable audio.
4. Click [OK].
You now should be all set up to begin recording audio. Refer to the B.A.S.I.S.
manuals to find out how to enable sound recording in the software.