User guide

Digital Video Hardware User Guide
revision 38 — 129
9. If you wish to make changes to these settings, you may do so at a later time
by selecting Start > Programs > Lenel Network Video Recorder > LNVR
Setup.
Matrix Player
The Matrix Player is only used for troubleshooting and diagnostics on the
network recorder.
PTZ Control
Axis IP cameras can control some PTZ devices. The cameras have pre-installed
drivers that control a number of PTZ housings and allow to configuration through
the camera’s web-interface.
1. Using camera web-interface, configure the camera to control the PTZ
housing. Follow the instructions provided with the camera.
2. Be sure to verify that configuration is correct. Check that the PTZ housing
can be controlled using camera’s provided web interface.
3. In Alarm Monitoring, the PTZ toolbar will be present when viewing live
video so that you can control this PTZ device.
The AXIS 2420, AXIS 2400, and AXIS 2401 have the ability to control PTZ
devices. Since each camera has a specific list of compatible PTZ devices, reder to
the manufacturer manual for more details.
B.A.S.I.S. and the LNVR do not require any other changes to make PTZ
functional. This feature will work automatically once it is configured for the
camera.