User guide

Digital Video Hardware User Guide
revision 38 — 127
5. The LNVR Settings Properties window is displayed. The Storage tab is used
to configure the location of data for the network recorder.
a. Under Available drives, all local hard drives and mapped network
drives are listed. Select a drive and click the arrow key to move the
selection to the other column (Drives to use for recording).
• If you are using network drives, it is recommended that a user
account be created to access those network drives.
b. Specify the name of the folder where the data is to be stored. If the name
of the folder specified does not already exist, it will be created.
c. Enter the amount of free space (in MB) to be maintained on each drive.
If this field is left blank, no free space will be maintained. The network
recorder will always continue to record by deleting the oldest video files
if drive space becomes depleted.