User guide

18: Network Video
124 —
revision 38
2. The program will automatically detect IP cameras connected to the network.
The MAC address, IP address, model, and serial number will be displayed.
3. You may need to cycle power to your IP camera. To do so, unplug the
camera from the network, and then plug it back in again.
4. To change the IP address, select the MAC address of the camera you wish to
change.
5. Click the radio button, Use the following IP address.
6. Enter the new IP address.
7. Enter the subnet mask.
8. Enter the default gateway.
9. Enter information for the DNS server address. If you do not know what to
enter, please check with your network administrator.
10. Once you are finished, click [OK] to save your changes and exit.
If there are other cameras to configure, you may click [Reboot] and select
another camera.