User guide

18: Network Video
122 —
revision 38
Note: If the camera is properly installed and online, the firmware version number
will be displayed next to the camera name. Cameras loaded with firmware
version 2.30 may be seen online, but still MUST be updated to version 2.32.
2. Select Download Firmware from the popup menu.
Alternatively, firmware updates can also be run as scheduled tasks. To do so, use
the Scheduler in System Administration to set up a scheduled download.
1. In the Scheduler, click on the [Add] button. The Add Action Wizard
appears.
2. Select “IP Camera(s) Firmware Download” from the list. Click on the [Next]
button.
3. Enter the schedule you would like for firmware to be downloaded to IP
camera(s).
4. Click on the [OK] button.
Sony IP Cameras
Specifications for the Sony IP cameras may be found in the included
documentation.
The Sony IP camera model SNC-VL10 may be used for IP surveillance only.
SNC-VL10
The Sony IP camera model SNC-RZ30 may be used for both IP surveillance and
recording.