User guide

Digital Video Hardware User Guide
revision 38 — 121
2. The program will automatically search for IP cameras connected to the
network. The serial number(s) and IP address(es) will be displayed.
3. You may need to cycle power to your IP camera. To do so, unplug the
camera from the network, and then plug it back in again.
4. To change the IP address, click on the serial number to select it.
5. Enter the new IP address.
6. To assign it, click [Set IP address].
7. Once you are finished, click [Close].
Axis Firmware
B.A.S.I.S. functions with the Axis IP camera equipment using firmware version
2.32 or later.
Firmware can be updated within the B.A.S.I.S. application if the Axis hardware
has firmware version 2.30 or later loaded on it. Earlier versions of the firmware
must be updated by following the instructions on the Axis website:
www.axis.com
.
Update the Axis Firmware
Firmware can be updated in Alarm Monitoring.
1. Right-click on the device (in the System Hardware Tree) which is to have its
firmware updated.