User guide

Digital Video Hardware User Guide
revision 38 — 107
Network Configuration
1. Click [NET MENU]. Doing so will bring up the Network Configuration
menu.
2. Click [NET SETTINGS]. Before loading the new page, you will be asked to
provide a user name and password. Use the following defaults:
•User name: ADMIN
• Password: PASSWORD
Make sure these are typed in uppercase.
3. On this page, you may make changes to network settings.
RAID Configuration
Once the network settings are completed, you will need to set up the SCSI host
channels.
1. On the Main Menu, click [RAID MENU]. This will bring you to the RAID
Configuration menu.
2. Click [BOOT MODE].
3. Select the option “Enter RAID configuration mode” and click [Apply new
bootup mode].
4. Click [ARRAY CONF.].
5. For the RAID level, select RAID 5 (rotating parity). For the stripe size,
select 64 Kbytes.
6. Using the list on the web page, select the drives for the array.
7. Click [Create RAID set]. Doing so will create the RAID array. This process
may take up to several hours.
8. On the RAID Configuration menu, click [ADD VOLUME]. Enter the name
and size (in MB) for the new volume.
9. Click [Create Volume].
Configure the Digital Video Recorder
1. Open the Computer Management window by right-clicking on My
Computer and selecting Manage.
2. Select Disk Management and add the hard drive.
The ATAboy2 is now ready for use as an additional storage unit.
For more information, please refer to the Nexsan ATAboy2 product manual.