User guide
Digital Video Hardware User Guide
revision 38 — 105
Chapter 14: Nexsan ATAboy2
Optionally, the Nexsan ATABoy2 can be used for additional storage if needed.
The unit can be attached to the digital video recorder as an additional volume.
ATAboy2 Setup
Use the following diagram to connect the ATAboy2 properly.
Be sure to plug the network cable into the Ethernet port. Configuration of the
ATAboy2 is done through the web interface.
A SCSI connection to the digital video recorder is required.
Note: Make a note of the serial number on the back of the unit. You will need this
number to configure the IP address later.