User guide

13: Troubleshooting
102 —
revision 38
Configure Windows 2000 Network Settings
1. Login using the administrative account. This account must be used because
these configurations are done in the administrative profile.
2. Right-click on the My Network Places icon and select Properties.
3. Right-click on Local Area Connection and select Properties.
4. Highlight Internet Protocol (TCP/IP) and click the [Properties] button.
5. Click the Use the following IP address radio button and enter the following:
• IP Address: 192.168.1.150
• Subnet Mask: 255.255.255.0
6. Click the [OK] button twice.
7. Click the Advanced menu option at the top of the screen and then select
Network Identification.
8. On the Network Identification tab, click the [Properties] button.
9. Select the Workgroup radio button at the bottom of the screen and enter
SECURITY.
10. Click the [OK] button twice.
11. Manually reboot the computer.