User guide

Digital Video Hardware User Guide
revision 38 — 101
RAID controller software you're using. For the 7.4 release the versions
must be:
• Monitor: ME7X 1.01.00.034
• Firmware: FE7X 1.04.00.024
• BIOS: BE7X 1.07.02.008
• PCBA: Rev3
•AChip: V3.20
• PChip: V1.30
c. If the firmware is not the right version:
1) Create a firmware upgrade diskette from the files you downloaded
from www.3ware.com
.
2) Reboot the machine.
3) Upgrade the firmware
4) Reboot the machine.
5) Perform the steps in the “Configure the RAID Controller Board
BIOS” section to ensure that the RAID controller BIOS settings are
correct.
d. Close the window.
Install Windows 2000
1. Insert disk 2 of the B.A.S.I.S. Installation CD into the CD-ROM drive. The
installation program will automatically start.
2. Click the [Win2K Service Pack 2] button and then click the [Next] button.
3. The program will prompt you for the following information:
• Name and Organization
• Product ID number from the software copy that is included with the PC
• Computer name
• Administrative password
4. When installation is complete, click the [Exit] button. The computer should
automatically reboot.