User manual

[e-mail] Page | 65 1-800-930-0949
Adding a device on LAN
Click the icon and the app will search for cameras within your LAN, these cameras will then be
added to the app automatically. Make sure you are connected to the same wireless network on your
phone as you cameras.
There is an icon after the camera name. When you click this you will be asked to enter the user
name, password and HTTP port to log into the camera.
Adding a device on WAN (Public/External IP Address)
Step 1: Click the Add Camera icon to add cameras manually.
Step 2: Select the compression type for your camera: MJPEG or H.264. Next, enter the camera’s basic
information like camera name, IP address, HTTP/Media Port, Username, Password, and so on.
The cameras
on LAN can
be searched
and added
automatically