User manual

[e-mail] Page | 35 1-800-930-0949
Use the Network Connection Details window to double check your network settings.
Make sure you are looking at the fields that start with “IPv4.” You will see Subnet Mask, Default Gateway,
and DNS Server as seen in the screenshot above. Check your subnet as well, for example, our subnet in
the screenshot above is “192.168.1.”
Note that the IP address seen in the network connection details is actually the IP address of our
computer. Make sure the fourth section of your camera’s IP address does not match this IP address.
Every device on your network must have its own separate IP address. As such, the camera cannot have
the same IP address as your computer. Keeping this in mind, also remember that if you are setting up
multiple cameras, they cannot have the same IP address or port number. Be sure to change both the
address and the port if they are being shared by another camera.