User manual

[e-mail] Page | 31 1-800-930-0949
6.4 – User Settings
Here you can set permissions for visitors, operators, and administrators. Visitors have access to view the
camera, record, take snapshots, use audio, and enable an onscreen display. Operators are able to do
everything visitors can do, with the added abilities to pan and tilt the camera, change brightness and
contrast settings, change FPS settings, and flip/mirror the camera. Administrators are able to do all of the
previous features with the added ability to go into device management and adjust all of the settings of the
camera.
On the User Settings page you can set the location you would like alarm video recordings to save. You
can set the path for alarm recordings as well if you would like to a separate path, using the “Set
AlarmRecord Path” option. Click “Browse” to choose the folder you would like to save recordings to.
Note that you need to keep each camera open in a separate browser window to save alarm recordings.
If you receive an error such as “Set the record path fail” when you try to select a path to save
recordings, try configuring the following:
Navigate to Tools, then Internet Options. Click on the Privacy tab at the top, then click “Sites.” You will
need to add the camera as a trusted site. Insert the URL (IP address of the camera) in the trusted sites
field and click “Allow” to add it. Push OK and Apply, then restart your browser.
If you still have problems, navigate to Internet Options again, then under the “Security” tab, try
unchecking the box which reads “Enable Protected Mode.” Click Apply, then OK, then try restarting the
browser, logging into the camera, and setting the path again.