User manual

[e-mail] Page | 25 1-800-930-0949
Section 6: Record, Snapshot, and Full Screen Buttons
1 - Record Button: Click this button and a pop-up window will appear, you can choose your storage path
for video and put the file name you would like for the recording. Once you push OK the camera will start
recording. The icon will change to , you can click the icon again to stop recording.
2 - Snapshot: Click this button to take a snapshot of the current video feed on the camera. This will open
up another window with the snapshot. You can save this snapshot by right clicking the image and
choosing “Save image as”. You can then save the image wherever you would like.
3 - Full Screen: Click this to make the camera full screen. You can also double-click the video to do this.
Section 7: Play/Stop/Talk and Audio Buttons
1 – Play: Click this to activate the video feed of the camera (if the video is not active).
2 – Stop: Click this to deactivate the video of the camera (if the video is active).
3 - Talk Button: Clicking this icon will enable talking through the microphone on your PC. This will allow
input from your microphone to come out of the camera speakers. The icon will change to this icon once
activated: Click the icon again to stop the microphone input.
4 - Audio Button: Clicking this icon will enable sound captured by the camera’s built-in microphone. You
will be able to hear what is happening at the location of the camera. When you click on the icon, it will
change to , this signifies that the audio is active. You may need to plug in headphones or activate
your computer speakers to hear the camera microphone.
1
2
3
1
2
3
4