User manual

[e-mail] Page | 22 1-800-930-0949
.
Section 3: Image Parameter Settings
OSD: OSD is used to add a timestamp on your video. Five different colors are available.
Add OSD on record: Select this option if you’d like to add a timestamp to your recordings.
Resolution: You can choose from two different resolutions, 320 x 240 (QVGA) or 640 x 480 (VGA)
The bigger the resolution, the better the image quality is, but the lower the frame rate is. If you are
accessing the camera via internet and want to get smoother video streaming, please select the QVGA
resolution of 320 x 240.
Mode: There are three different modes you can use for the camera, 50HZ, 60HZ, and Outdoor.
The mode you set depends on the frequency of the electricity and the type of model you have (indoor or
outdoor). If the camera is being installed outside, please use the outdoor mode for best results.