User manual

[e-mail] Page | 14 1-800-930-0949
Upgrade Firmware
Clicking this option allows you to upgrade the firmware or the WebUI of the camera directly from IP
Camera Tool. Make sure to upgrade the firmware first, and then upgrade the WebUI.
Refresh Camera List
Clicking this allows you to refresh the camera list manually. If your camera is not showing up you can try
using this option to refresh the cameras in the list.
Flush Arp Buffer
Clicking this allows you to refresh the camera list. Sometimes you may not be able to see the camera if
both the wired and wireless IP addresses of the camera are fixed. Use this option to refresh the camera
list. Once you have used this option, close the IP Camera Tool and then open it again.
About IP Camera Tool
This option shows information about your current version of IP Camera Tool.