User manual

[e-mail] Page | 10 1-800-930-0949
5.1 – IP Camera Tool
Double click the IP Camera Tool icon and the following screen should appear.
The IP Camera Tool
The IP camera tool should find the camera’s IP address automatically after you plug in the network cable.
If not, please make sure that DHCP is enabled on your router and that MAC address filtering, firewalls
and anti-virus are disabled temporarily until the camera is set up.
MJPEG cameras like the FI8910W will have an “M” next to the local IP address in the software. H.264
compression cameras will have an “H” next to their local IP address.
There are six different options that the IP Camera Tool has. Highlight a camera in the IP Camera Tool list
and right click on it. The six options that appear are: Basic Properties, Network Configuration, Upgrade
Firmware, Refresh Camera List, Flush Arp Buffer, and About IP Camera Tool.
IP Camera Tool showing six different options after right-clicking.