User manual

40
12000 Ford Road, Suite 110
Dallas, TX 75234 Tel: [phone] Fax: [phone]
www.idview.com
【Port】port no for mobile monitor, which you need to make a router mapping of if want to visit it by
mobile
【UPNP】
UPNP protocol can auto port forwarding on router,make sure UPNP is enable on router before use
it.
Pic 4.27 UPNP setting
【Enable】tick means chosen，open UPNP function，setting is valid only when it is enable
【HTTP】： Route will automatically distribute HTTP port for the device, when IE viewing, it need this
port；
【TCP】： Router will automatically distribute TCP port for the device, when monitoring via CMS, it
need this port.
【MobilePort】Router will automatically distribute Mobile Port for the device, when mobile monitor, it
need this port.
4.4.5 GUI display
At local preview interface, including：Channel name, Time title, Channel title, Region cover