User manual

19
12000 Ford Road, Suite 110
Dallas, TX 75234 Tel: [phone] Fax: [phone]
www.idview.com
file type is “M”.
Alarm:Trigger the external alarm signal in the set time section. When above alarm is set as
opening recording, the “detection recording” state is on. The video file type is “A”.
Remark：related alarm setting, please refer to chapter 4.3 alarm part.
4.2.2 Snapshot storage
Setup snapshot parameters for different channels.At first time it's set for 24hours snapshot
continuously, pls go to Main Menu->Record->Snapshot Storage for appropriate settings.
Remark：Device installed with TF card and set partition, Snapshot should more than 1G, then device
can normally take snapshot.（detail please refer to chapter 4.5.1 HDD manage）
Pic: 4.2 Snapshot setting
【PreSnapshot】to take picture of 1-30 pcs before recording happens, default is 5 pcs
【Record】Set record type, "Timing" ,"Manual" and "Stop"
Timing: Realise snapshot according to record type(regular, detect and alarm) and period.