User's Manual



PairingaBluetoothDevice

1.InserttheBluetoothAudioReceivertothe30pindock.

2.TurnonyouriPoddockingstationandselecttotheiPodmode.

3.AredcolorLEDindicatorwillbeflashingwhichmeanitispoweringon.

4.Onceitispowered,theLEDindicatorwillchangetogreencolorandflashing

slowlyandreadyforpairing.

5.TurnontheBluetoothfunctionandstartingsearchingtheBTreceiver.

6.Onceitispaired,theLEDindicatorwillchangetogreencolor.

7.Then,youcanselectyourfavorablesongtolistenviathedockingstationby

Bluetoothtechnology.



Remarks:

1.Ifyoucan'tsearchthedevice,pleasepressthePAIRbuttononthetopoftheunit

togenerateBluetoothsignal.

2.TheLEDindicatorwilloffifthereisnodeviceispairedafter10minutes.



PAGE 1
Pairing a Bluetooth Device 1. Insert the Bluetooth Audio Receiver to the 30 pin dock. 2. Turn on your iPod docking station and select to the iPod mode. 3. A red color LED indicator will be flashing which mean it is powering on. 4. Once it is powered, the LED indicator will change to green color and flashing slowly and ready for pairing. 5. Turn on the Bluetooth function and starting searching the BT receiver. 6. Once it is paired, the LED indicator will change to green color. 7.
PAGE 2
FCC STATEMENT: 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.