User`s guide

Picture Porter Elite
User’s Guide
Page 55
Revision 1.2.8-1
Some of my JPEG picture files are not showing up on Picture Porter Elite.
‘.jpg’. Picture Porter Elite uses the
file extension to identify the file type and can not recognize JPEG files with a
extension to ‘.jpg’ and try
•
ort other formats such as Progressive or Arithmetical JPEG
I canno
• ere are so many different video standards and settings, even within
se
ne of the formats
V9).
I se o
Porter
lay signal
cumentation
the different video input
• Make sure that the JPEG file extension is
different extension such as ‘.jpeg.’ Modify the file
again.
Make sure that the JPEG file is in Baseline JPEG format. Picture Porter Elite
does not supp
formats.
t play a video that is in a format supported by Picture Porter Elite.
Since th
the same format, it is possible to have incompatibilities. To resolve this, u
video conversion software and convert your video file to o
supported by Picture Porter Elite (MPEG-1, MPEG-4, WM
e n images or only distorted images on my TV after connecting Picture
Elite.
• Make sure your TV is set to proper video input mode that will disp
from the input source Picture Porter Elite is using. Check the do
that came with your TV for more information about
mode settings.
• Make sure all the cables are connected correctly. Refer to Section 3.10.1
Connect Picture Porter Elite to TV for detailed instruction.
• Go to Options and access the DISPLAY tab. Change the TV Stand
setting to NTSC or PAL, depending on the type of TV you are using. If yo
are unsure about which setting is correct for your TV, try different settings
until you find one that displays clearly. NTSC is the TV standard used in
North America. The PAL standard is commonly used in Europe.
ard
u
e a
war n
•
I conne but I cannot print the photos.
•
When connecting Picture Porter Elite to my computer, my computer gives m
ni g about a power surge.
Your computer USB port is unable to provide stable power to Picture Porter
Elite. Attach the AC power adapter to make sure that Picture Porter Elite gets
a sufficient and stable power supply.
cted Picture Porter Elite to a printer
• Make sure that you turn on both Picture Porter Elite and your printer before
connecting Picture Porter Elite to the printer.
Make sure you are using a PictBridge compliant printer.
• Make sure you selected
PictBridge/Media Player under USB Mode in
Options
.
• Confirm that the photo you are trying to print is a JPEG file. Picture Porter
Elite only supports direct print of JPEG files.