Manualshelf

User`s guide

ManualsBrandsDigital Foci ManualsComputer equipmentPicture Porter 35
41424344454647484950
Picture Porter Elite
User’s Guide
Page 44
Revision 1.2.8-1
4 tem Settings .1. Change Sys
Each of the SYSTEM Settings options is explained below.
• Language: Select among 11 different display languages for the user interface.
• Auto Shutdown Timer: Adjust the amount of idle time allowed before Picture
Porter Elite automatically shuts down to conserve battery life. You can set the
timer to a value between 1 minute and 30 minutes or Off. Select Off to disable
this feature.
• Hard Disk Sleep Timer: Adjust the amount of idle time allowed before Picture
Porter Elite automatically sleeps the hard drive to conserve battery life. You
can set the timer to a value between 1 minute and 180 seconds or Off. Select
Off to disable this feature.
• Copy Speed (HD): Select copy speed between Normal and High. These
different copy speed settings let you utilize the newest technology to optimize
your hard drive copy speed. Note that if you select High and have an
incompatible device, you may encounter problems during the copy process.
The hard drive in your Picture Porter Elite will support the High Copy Speed
setting.
• Copy Speed (CF): Select copy speed between Normal and High. These
different copy speed settings let you utilize the newest technology to optimize
your Compact Flash memory card copy speed. Note that if you select High
and have an incompatible device, you may encounter problems during the
copy process. If you are using a CF card that does not support high data
transfer rate, you should select Normal.
• USB Mode: Select between Mass Storage Device and PictBridge/Media
Player. Select PictBridge/Media Player when connecting to PictBridge
compatible printers and when connecting to the computer for downloading
music through Windows Media Player 10. Select Mass Storage Device when
connecting to your computer to access the Picture Porter Elite internal hard
drive and to use it as a card reader.
• Time Zone
: Set the time zone for your date and time setting.
• Date Time
: Set the local date and time. Use the + / - buttons to set the values.