User`s guide
Picture Porter Elite
User’s Guide
Page 33
Revision 1.2.8-1
3.8.
3.8.1.
Listen to and Record FM Radio
Listen to FM radio
You
is FM 8
ion as the FM antenna for the Picture Porter Elite radio.
can use Picture Porter Elite to listen to FM radio. The available frequency range
8 MHz ~ 108 MHz.
1. Connect the earphones to the earphone jack of Picture Porter Elite. The
earphones funct
2. Navigate to and select Radio from the main navigation screen.
3. To scan for channels, tilt the joystick to the right or left for 2 seconds and
release. The tuner will stop at the first frequency with an adequate signal.
4. To save the current FM station, press the Menu button and select Save.
Select the channel number you would like to assign to 5. the current channel.
You can save up to 18 stations, 9 in each of Group 1 and Group 2. Press the
Menu button and select Group 1 or Group 2 to toggle between the two
groups.
6. Tilt the joystick up or down to go to the previous or next saved channel.
You s and
sav
To do this, press the Menu
can also have Picture Porter Elite scan through all available FM station
e the nine stations with the strongest signal.
button and select Scan and Save. Please note that this
ave the nine FM stations with the strongest signal, will automatically scan and s
deleting all the stations you have previously saved to the current group.
3.8.2. Record FM radio
You can also record FM radio on Picture Porter Elite.
1. Find your desired FM channel.
2. Press the Menu button and select Record to start the recording. The recording
will start as soon as you select Record.
3. To pause and resume the recording, press the center of the joystick. You will
hen the recording is
4. To stop and save the recording, press the button.
The recorded files are saved into the AudioRec
be able to continue listening to the radio station even w
paused.
folder in Picture Porter Elite, in
AAC format.
To access the recorded audio files:
1. Select AudioRec from the main navigation screen.
2. Select Playback
.
3. Navigate to and select the desired file for playback.