User`s guide

Picture Porter Elite
User’s Guide
Page 32
Revision 1.2.8-1
3.7.2. Record audio files from line-in audio source
1. /Video bus cable to connect your line-in audio source
source.
Use the included Audio
to Picture Porter Elite. First, connect the Audio/Video bus cable to the input
port on the bottom of Picture Porter Elite.
2. Then, plug the audio connectors (colored white and red) of the Audio/Video
bus cable into the output of your audio
3. Navigate to and select AudioRec from the main navigation screen.
4. Select Record.
5. Press the Menu button and select the Line-In option.
6. Select Quality to access menu for recording quality options. Scroll to the
oystick to select.
ing.
desired recording quality and press the center of the j
9. You may turn on AOUT (audio output) so that you can monitor the record
This can be used for you to test the recording levels.
• To turn on audio output, press the Menu button and select AOUT On.
• To turn off audio output, select AOUT Off.
10.
11. nter of the joystick.
n.
3.7
To start the recording, press the center of the joystick.
To pause and resume the recording, press the ce
12. To stop the recording and save the file, press the  butto
.3. Playback audio files
Recorded audio files are saved into the AudioRec folder on Picture Porter Elite.
bers
corded files will have
Picture Porter Elite assigns the names of the recorded files in sequential num
starting from ‘0000’ that come after the “AREC” prefix. Your re
files names like AREC0000.AAC, AREC0001.AAC, AREC0002.AAC, …,
indicating the order in which they were recorded.
To access the recorded audio files:
1. Select AudioRec
from the main navigation screen.
2. Select Playback.
3. Navigate to and select the desired file for playback.