User`s guide

Picture Porter 35
User’s Guide
Page 19
Revision 1.1.1-1
• Date Set: Set the system date by adjusting the month, day,
and year.
1. Navigate to Date Set
and press ENTER to set the date.
2. Roll the JOG DIAL to change the current value and the
VAL +/- buttons to change between the date fields.
3. Press ENTER to accept your setting for the date setting.
Note
: Date is listed as MM/DD/YYYY (month/day/year).
• Time Display
: Choose to Show or Hide the time on the
screen during the slideshow.
• Date Display
: Choose to Show or Hide the date on the
screen during the slideshow.
3.2.2. Display Options
Each of the Display options is explained below.
• Screen Brightness
: Select screen brightness setting from 1
to 10 (with 10 being the brightest).
• Screen Saver
: Adjust the device idle time allowed before the
screen turns off to conserve battery life. You can set the
timer to a value between 1 second and 180 seconds or Off.
Select Off
to disable this feature.
• Language
: Select among different languages available.
• Video Out
: Switch between NTSC and PAL TV standards for
operation on your TV or display device.
Note:
NTSC and PAL refer to television broadcast
standards. All televisions purchased and used in the US use
the NTSC standard. The PAL standard is used in Europe.
3.2.3. File Options
Each of the File options is explained below.
• Show Unsupported Files
: Choose to Show or Hide
unsupported files on device. If Hide
is selected, Picture
Porter 35 will only show the file formats that can be played
on the device.
All files will be displayed when accessing the Picture Porter
35 hard drive by computer.