User`s guide

Picture Porter 35
User’s Guide
Page 7
Revision 1.1.1-1
2.3. Battery and Power Management
On a full charge, Picture Porter 35 is capable of up to 4 hours of
continuous video playback and up to 3 hours of non-stop memory
card copy.
2.3.1. Installing the Battery
1. Locate the battery door at the right bottom of Picture Porter
35. Press down the battery door latch to release it and swing
it open in a counter-clockwise rotation.
2. Insert the included Polymer Li-Ion Battery into the battery
compartment. Make sure that the Battery Tab* of the battery
is at the top opening of the battery compartment.
3. Close the battery door until you hear a solid click and the
latch is locked.
* The Battery Tab is used as a finger latch to remove the battery.
d
c
Opening Battery Door:
(1) With your index finger, press down
and release the latch as shown.
(2) With your thumb, catch the bottom
edge of the battery door to rotate out.
Inserting Battery:
When inserting the battery,
make sure the tab of the battery
is at the top opening as shown
in the circle above.
Batter
y
Tab