User`s guide

Memory Card Gateway
TM
User’s Guide
FCC Compliance
FCC Rules and Regulations – Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired
operations.
The board has been tested and verified to be within the energy emission limits for Class B digital devices as
defined in Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential situation. This board generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. Installed correctly, it probably will not interfere with your radio or TV. However, we
do not guarantee the absence of interference.
If you modify the board in any way, without approval from Digital Foci, Inc., your board may violate FCC
regulations. Violation of FCC regulations may cause the FCC to void your rights to use the modified board.
If you suspect this board is causing interference, power off and on the device while your radio or TV is
showing interference. If the interference disappears when you turn the device off and reappears when you
turn the device on, something in the device is causing interference.
To reduce interference, try these suggestions:
• Change the direction of the radio or TV antenna.
• Increase the separation between the device and radio or TV.
• Connect the device into an outlet on a circuit different from that to which the radio or TV is connected.
If these suggestions don’t help, consult your computer dealer or an experienced radio/TV technician for
more suggestions.
Page 27
101-01-02