User`s guide

Memory Card Gateway
TM
User’s Guide
Driver Installation
For Windows 98/SE, Windows 2000, and Macintosh OS 8.6, device driver
installation is required.
For all other supported computer operating systems, device driver installation is
not required.
For all Windows operating systems, it is recommended that you install the Disk
Monitor Utility from the Resource Disc. This program will assign descriptive
icons and labels for the device.
Windows Operating System
The installation procedure for all supported Windows operating systems (98/SE,
2000, ME, XP Home, and XP Professional) follow the same general process.
The step-by-step instructions for Windows operating systems are as follows:
1. Close all programs running on your computer.
2. Insert the Resource Disc into the CD-ROM drive.
3. Locate and open the “Driver” folder on the Resource Disc by using
Windows Explorer.
4. Double-click on the Setup icon.
5. Read the Welcome Message in the first window and click Next.
6. (Windows ME and XP only) Plug in your Memory Card Gateway at the
prompt and click Yes.
7. Select the option that you wish to use and click Next.
(It is recommended that you choose the Complete option for installation.)
Note
: The driver installation portion of the Resource Disc contains 2
programs: (1) the actual device drivers and (2) the Disk Monitor Utility.
The device drivers
(required by Windows 98/SE and 2000) allow your
computer to recognize and use the device.
The Disk Monitor Utility
tells your computer to replace the generic
removable disk icons and labels with descriptive icons and labels (as
explained on page 8). This is optional.
Page 15
101-01-02