User`s guide

Memory Card Gateway
TM
User’s Guide
Inserting Memory Cards
Each memory card should be inserted in the manner explained below:
• MS: Position the MS card with label side facing up and connector side
pointing forward.
• SD/MMC: Position the SD/MMC card with label side facing up and connector
side pointing forward.
• SM: Position the SM card with gold connector side facing down and pointing
forward.
• CF/MD: Position the CF/MicroDrive with label side facing up and connector
side pointing forward.
Push the card in gently until you feel a slight “click” and the memory card
connectors make contact with the device. The corresponding LED will light up.
Note: For MS DUO and miniSD use the adapter provided by the manufacturer of
the memory card.
Warning
: Take special care to insert the correct memory card type in its
designated slot. If the memory card does not slide in easily, double-check that
you are inserting it in the correct slot and in the correct manner.
Once the memory card is properly inserted, its respective LED will light up and
the card will be accessible.
LED Indicators
The Memory Card Gateway
TM
uses LED indicators to let you know its
operational status. There are 5 LED indicators:
• 1 LED indicates the power status of the device.
• The other 4 LEDs indicate the activity of each of the 4 memory card slots.
(Refer to Device Overview section on page 5 for a diagrammed view.)
Power LED
When the device is plugged in and receiving power, the LED for the power
indicator will turn red.
Page 11
101-01-02