OHP 6000 User Manual On-Hold Plus 6000 Digital MP3/WMA On-Hold Audio System Before using this unit, please read these operating instructions carefully. Afterwards, keep them handy for future reference.
OHP 6000 User Manual Supplied Accessories USB Cable Connector Cable A (Phono /RCA plugs) Connector Cable B (3.5mm mini to RCA) AC Adapter MessageStudio Software & Drivers OHP 6000 Series Features MP3/WMA file playback - Plays ordinary MP3 and WMA files. USB connectivity - Update content by connecting the 6000 to a PC and transferring MP3 or WMA files to its on-board flash memory.
OHP 6000 User Manual Set-up Connection to PBX or KEY phone systems IMPEDA AUDIO 9V DC NCE OUT USB POWER music-on-hold input PBX or Key System 1 Plug AC adapter into wall outlet. 2 Plug AC adapter cable into jack marked "DC9V". 3 Plug "Connector Cable*" to "AUDIO OUT" jack. 4 Plug other end of "Connector Cable" into phone system's music-on-hold (MOH) input jack. NOTE: If the jack cannot be located, contact your phone vendor for assistance.
OHP 6000 User Manual Set-up Connection to PC PC Player IMPEDA AUDIO 9V DC NCE OUT USB POWER USB cable IMPORTANT: Before connecting the USB cable from the PC to the unit, please make sure the power switch on the player is in the OFF position. 1 Plug USB cable (square socket) into the USB jack on the back panel of the player. 2 Plug the other end of the USB cable (rectangular) into the USB port on the back of the PC. 3 Connect the power supply to the 9VDC jack on the player.
OHP 6000 User Manual Controls & Functions Player Controls SELECT VOLUME used to select individual tracks for playback .
OHP 6000 User Manual Operation Playback Playing Audio Stored in Memory By default, the unit is always in "playback" mode. When unit is playing, the LCD will display a running time. Playback After Power Loss If power to the unit is lost, the unit will resume playback as soon as power is reapplied. Playback Modes The player is set to the PLAY mode as a default. You may stop playback by pressing the PLAY/STOP button. Using the "REPEAT MODE" button, you can select from one of three modes.
OHP 6000 User Manual Operation (cont'd) USB Connection 1 2 3 4 5 6 7 8 9 10 Turn the POWER switch on the back of player to the OFF position. Plug the USB cable into the USB port on the back of your player Plug the other end of the cable into the USB port on your computer. Turn the POWER switch to the ON position (LCD will show an icon of a computer and a memory card with the word "READY.") Locate and select any MP3 or WMA audio file(s) or file(s) created and saved with the MessageStudio software.
OHP 6000 User Manual Settings Power Switch Location -- rear panel Operation -- turns power on or off. When power is on, LCD is illuminated. Impedance Switch Location -- rear panel Operation -- An 8 ohm output is the default. Older phone systems may require the 600 ohm setting. Speaker Switch Location -- right side, located next to the memory card slot. Operation -- Slide the "SPEAKER" button to "ON" position to listen to program playing from digital memory.
OHP 6000 User Manual MessageStudio Player Software TM Creating Custom On-Hold Audio Using MessageStudio software, creating professional sounding custom on-hold audio is simple, quick and easy. MessageStudio will run on any Windows (95, 98, 2000, NT & XP) - based PC with a 486 or better processor and a 16-bit sound card. Mac users can run MessageStudio by using Virtual PC version 3.0 or greater.
OHP 6000 User Manual MessageStudio Writer Software Creating an On-Hold Audio Script To assist you in writing your on-hold audio script, the MessageStudio software includes a fun and easy scriptwriting utility called MessageStudio Writer. This utility may be accessed from the main screen of the software by clicking on the "Write Msg." button (located at the bottom right of the screen). Even if you’re not a Madison Avenue copywriter, you’ll find the process quick, easy and fun.
OHP 6000 User Manual Warranty Limited Warranty On-Hold Plus warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 3 years from date of original purchase in the United States. Should service be necessary under this warranty for any reason due to manufacturing defect during this 3-year period from date of original purchase, On-Hold Plus will either repair the unit or replace it with a reconditioned unit at no charge.
OHP 6000 User Manual Information FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
