User manual

4-2 LAN communication code configuration

1. Switching by explorer

Command set sent to web server (matrix router) for switching

Beginning with character train of “LCD.CGI”, “O 0

1 = I 18” means “Output 01 Input 18”, the sequences and sizes of

character train should be the same.

After execute reset, it should be conne

cted again to server (switcher).

Channel change

http://192.168.0.2/LCD.CGI?O01=I16&O02=I18&O03=I11&O04=I12&O05=I13&O06=I08&O07=I15&O0

8=I16&O09=I17&O10=I02&O11=I01&O12=I02&O13=I03&O14=I04&O15=I05&O16=I06&O17=I07&O18

=I08&Submit_=SEND

Initialization (Reset)

http://192.168.0.2/LCD.CGI?O01=I16&O02=I18&O03=I11&O04=I12&O05=I13&O06=I08&O07=I15&O0

8=I16&O09=I17&O10=I02&O11=I01&O12=I02&O13=I03&O14=I04&O15=I05&O16=I06&O17=I07&O18

=I08&Submit_=Reset

LAN Switch Control on explorer

4-3 Connector Pin Assignment

POWER INPUT

Part No. Pin No. Description Remarks

1 VCC( DC12V)

2 VCC(DC12V)

3 GND

Power Jack(4P)

4 GND