User manual

Copyright 2008 RTcom USA., Inc.
23
4 Communication code configuration
4-1 Configuration of RS-232C communication code
From Computer
Code (48Byte) Start Header (3Byte) | Product ID (2Byte) | Command (2Byte) | Data (40Byte) | Tail (1Byte)
Code Name Byte Data Function
Start Header 21h (!) Request Frame Start
Start Header 30h (0) Request Frame Start
Start Header 31h (1) Request Frame Start
Product ID 30h ~ 39h (DIP Switch Set) Product Number
Product ID 30h ~ 39h (DIP Switch Set) Product Number
01 Input SW Assign
02 Input SW Assign Salvo
03 EDID SW Assign
04 EDID SW Assign Salvo
10 Assignment Status Request
20 Reset
30 Firmware Version Request
Command
40 RS-232C Assign
Number of total Output
30h ~ 33h
Assign
of Total Output
Input Data10 30h ~ 39h Input Channel Select
Input Data1 30h ~ 39h Input Channel Select
Output First Data10 30h ~ 39h Output A Input Select Data
Output First Data1 30h ~ 39h Output B Input Select Data
Output Last Data10 30h ~ 39h Output N Input Select Data
Output Last Data1 30h ~ 39h Output O Input Select Data
Tail (End) 2Ah(*) Frame End
From Matrix Router
Code (8Byte) Start Header (3Byte) | Product ID (2Byte) | Command (2Byte) | Tail (1Byte)
Code Name Byte Data Function
Head (Start) 21h Reply Frame Start
Start Header 30h (0) Request Frame Start
Start Header 31h (1) Request Frame Start
Product ID 30h ~ 39h (DIP Switch Set) Product Number
Product ID 30h ~ 39h (DIP Switch Set) Product Number
Command 01,02,03,04,10,20,30,40 Command Return
Tail (End) 2Ah Frame End