User manual

Copyright 2008 RTcom USA., Inc.
18
: None, Flow Control: None
3-4 LAN (TCP/IP) Communication setting
t IP should be set.
. Set up at SYSTE
2. Execute Di
Baud rate: 19200, Data bit:8, Stop bit:1, Parity
In order to control to matrix trough LAN port, first of all, interne
The methods to set are as follow:
1 M CONFIG on main menu of touch panel
gital Controlle
r, MiniTerm.exe or Hyper terminal
After setting as above, connect communication and switch “ON” the EDM-1818M.
above screen shows up, press C key to start network configuration.
If C key is not pressed or ESC key is pressed, then it will be operated with existing IP.
If