User manual

Blackfin DEV-BF548-Lite. DEV-BF548DA-lite Hardware User Manual

After the install process you have to create a Platform using the Platform Wizard of the VDSP++. Please

follow the instructions to create a valid Platform for the Bluetechnix USB Debug Agent.

1. Open the VisualDSP++ Configurator from the start menu entry of VisualDSP++ 4.5.

2. Select “New…”

3. In the “Type” box select the Bluetechnix entry corresponding to the Core Module on your DEV-

BF548DA-Lite board.

4. Enter a Name for the Platform for example “Bluetechnix CM-BF537”.

5. Select “Ok”. The created platform should appear in the “Platforms” section of the “configurator”

window.

6. Press “Ok” to close the VisualDSP++ Configurator.

The last step is the creation of a VDSP++ debug session. Please follow the instructions below.

1. Open the “New Session Wizard” from the pulldown menu of the VDSP++ (SessionNew

Session) or press the “New Session” button on the “Sesson List” window that appears on

startup of VDSP++.

2. Select the processor corresponding to your Core Module and press “Next”.