User manual

Blackfin DEV-BF548-Lite. DEV-BF548DA-lite Hardware User Manual

3. Configure VDSP++4.5 to support the DEV-BF548DA-Lite by starting the Installer from your

support CD. Once started you should see the following dialog.

Note: To run the installer the .net framework is required!

4. Select the Core Module that you have inserted in the socket of your DEV-BF548DA-Lite.

5. Press the “Install” button.

6. You should get the following message:

7. Be sure that the board is powered on!

8. Connect X4 (USB JTAG) with an USB cable to a free USB port on your PC.

9. The following dialog or a similar one should appear:

10. Choose “Install the software automatically”, press “Next” and follow the instructions on the

screen.