User guide

MR-1000 user guide V1.3
9
5.1. RJ45 DATA port configuring
SaTerm:
1. Download SATEL SaTerm software at download page:
www.satel.com/userData/satel/downloads/software/SaTerm_sw_v4_3_5.zip
2. Install downloaded terminal program.
3. Choose the radio modem you want configure by pressing the MR-1000 front panel
MANUAL button; the main/standby leds indicate the selected radio modem.
Selecting the active radio modem is also possible with remote modem switch, see
page 10.
4. Open SaTerm -> Mode -> Open terminal -> Select the correct serial port
connected to modem. Serial port settings should be equal to radio modem (default
19200,n,1)
5. Select Mode  Transmit.
6. Write SL-command “SL%P=1” to the terminal window -> Press “Send” button. This
sets the radio modem to programming mode and configuration menu appears to
the selected COM port terminal window.
7. Configure the radio modem as described in the corresponding SATELLINE radio
modem manual.
8. Save settings to modem by pressing “E” or quit without saving by pressing “Q”.
Putty: Telnet and SSH client:
1. Open the source terminal emulator Download page:
www.chiark.greenend.org.uk/~sgtatham/putty/download.html
2. Choose the radio modem you want configure by pressing the MR-1000 front panel
MANUAL button; the main/standby leds indicate the selected radio modem.
Selecting the active radio modem is also possible with remote modem switch, see
page 11.
3. Open Putty and insert RS / Ethernet adapter IP address to HOST NAME.
4. Open Putty terminal -> press “Open” button.
5. Insert SL-command “SL%P=1” to terminal, this sets the radio modem to
programming mode and a configuration menu appears. Configure the radio
modem as described in the corresponding SATELLINE radio modem manual.
5.2. RJ45 NMS-port configuring
RJ45 NMS-port (Ethernet) is connected to a Brainboxes adapter. Both radio modems (Main
and Standby) have their own adapter COM port for NMS.
- Main modem NMS is connected to adapter port 3
- Standby modem NMS is connected to adapter port 4. Find the correct COM port
with “Boost. LAN Manager” application (page 6).
- The modem setup can be configured with “SATEL NMS PC software”.
Please refer to the SATEL NMS PC guide available at SATEL homepage:
www.satel.com/product/satel-nms-pc-software
5. ETHERNET PORTS ENABLED