User guide

MR-1000 user guide V1.3

Option 1: Prepare the rails or slides into your rack

cabinet. This is the preferred choice due to the

weight of MR-1000. Side slides make service

operations easier.

NOTE! The slides are not included in MR-1000

delivery.

Option 2: Use “Rittal ATX Economy

RAID” telescope slides (Appendix A).

NOTE! The slides are not included in

MR-1000 delivery.

1. Make the connections to the back panel (this can be done also after point 3,

depending on the cabinet structure).

2. Slide the MR-1000 rack into the cabinet and fix the bolts through the front panel

holes.

3. Connect the front panel connectors.

NOTE! At least 1U free space is required above and below of MR-1000 to ensure the

cooling airflow for the device.

11. MR-1000 INSTALLATION TO A RACK CABINET