User guide

MR-1000 user guide V1.3

Serial Port Settings changeable parameters are:

Speed, Parity, Data bits, Stop bits, Flow control, DCD (data carrier detect)

10.10. Gateway - Serial to Serial function

It is possible to bridge data from serial port to another serial port. First select “Serial-

Serial”. Next select the data input serial port (for example S01_RS bridged to port S04). It is

also possible to change data protocol mode (raw, dnp3).

NOTE! Changes to radio modem ports S01 and S02 always requires RS/ETH Link restart.

The RAW protocol mode is not functional on S01 and S02 ports!

Picture 10

Picture 11